Current position > Product detail
lubricating oil flow meter DN15
『lubricating oil flow meter DN15』Related information(clamp on meter|electromagnetic meter|venturi meterrotameter|orifice meter|ultrasonic flow meter|mass flow meter|coriolis mass flow meter|coriolis flow meter|magnetic flow meter|magmeter flow meter|magflow flow meter|mag meter flow meter|electromagnetic flow meter|vortex flow meter|turbine flow meter|thermal mass flow meter|thermal flow meter|rotameter flow meter)
lubricating oil flow meter DN15
# Lubricating Oil Flow Meter DN15: Selection Guide for Engineers
## Quick Answer
For lubricating oil flow measurement at DN15 pipe size, oval gear flow meters are the most reliable solution. They handle oil viscosities from 10 cP to 1200 cP with accuracy of ±0.2–0.5% of reading. Silver Automation Instruments supplies DN15 oval gear flow meters with 4–20 mA HART output, ATEX Zone 1 certification, and PT100 temperature option. Send us your pressure (bar), temperature (°C), viscosity (cP), and flow range to get a quote.
## Why DN15 Matters for Lubricating Oil
DN15 pipe size is common in lubrication systems for small machinery, compressor packages, hydraulic return lines, and marine auxiliary engines. A customer in Singapore recently asked us for a DN15 meter to monitor oil flow on a container ships main engine lubrication loop. The flow range was 0.3–6 m³/h, oil temperature 60°C, and viscosity 100 cP.
Heres the thing: not all flow meter technologies work well with lubricating oil at small pipe sizes. Electromagnetic meters require conductivity above 5 µS/cm. Most lubricating oils have conductivity below 1 µS/cm. Ultrasonic meters need clean fluid with no air bubbles. Oil systems often have trapped air during start-up. Coriolis mass flow meters work but cost three to four times more than oval gear meters for this application.
## The Best Fit: Oval Gear Flow Meter
Oval gear flow meters are positive displacement type. Two oval gears rotate inside a chamber. Each rotation displaces a fixed volume of fluid. The meter counts rotations and converts them to flow rate. The gears contact the fluid directly, so there is no slip. This makes them accurate for high-viscosity fluids like lubr
icating oil.
### Technical Specifications for DN15 Oval Gear Meter
| Parameter | Value |
|-----------|-------|
| Pipe size | DN15 (1/2 inch) |
| Flow range | 0.3–6 m³/h (5–100 L/min) |
| Accuracy | ±0.5% (standard), ±0.2% (optional) |
| Viscosity range | 1–1200 cP |
| Pressure rating | 1.6 MPa (optional 4.0 MPa) |
| Temperature range | –20°C to +120°C (optional +200°C) |
| Output | Pulse, 4–20 mA HART |
| Display | Local LCD, 6-digit totalizer and flow rate |
| Power supply | 24 V DC or battery powered |
| Material | Cast iron body, aluminum or stainless steel gears |
| Certification | ATEX Zone 1 II 2G Ex d IIB T4 |
| Connection | Threaded (BSP or NPT), optional flanged |
Most engineers skip this part: the meter body material matters. Cast iron is fine for lubricating oil. But if the oil has water contamination or the system uses seawater cooling, choose stainless steel 304 or 316. Last year a paint manufacturer in Vietnam ordered DN15 meters with stainless steel bodies because their oil contained trace solvents.
## Real Application Scenarios
### Marine Engine Lubrication
A shipping company in Indonesia runs 12 auxiliary engines on bulk carriers. Each engine has a DN15 oval gear meter on the lube oil line. The meters track oil consumption per engine per voyage. This helps the maintenance team detect wear early. If an engine uses 15% more oil than the fleet average, they inspect the piston rings and cylinder liners.
### Compressor Lubrication Systems
Air compressors for mining operations in South Africa use DN15 oval gear meters. The oil viscosity is 220 cP at 40°C. The meter sends a 4–20 mA signal to the PLC. If flow drops below 0.8 m³/h, the PLC triggers an alarm. This prevents compressor damage from oil starva『SILVER Official Website SERVICE』
User:flowmeasurementdevices9067aLast Time:07/24/2026
