Current position > Product detail
『Vortex flowmeter inlet』Related information(clamp on meter|electromagnetic meter|venturi meterrotameter|orifice meter|ultrasonic flow meter|mass flow meter|coriolis mass flow meter|coriolis flow meter|magnetic flow meter|magmeter flow meter|magflow flow meter|mag meter flow meter|electromagnetic flow meter|vortex flow meter|turbine flow meter|thermal mass flow meter|thermal flow meter|rotameter flow meter)
1. Where is the vortex flowmeter generally used and who is good at it? KNKE, a well-known American imported vortex flowmeter brand with good customer reputation and fast delivery time, is pleased to answer your question. The manufacturer of vortex flowmeter brand KNKE from the United States is good. The applications of vortex flowmeter are as follows:
1. Water flow measurement of large diameter pipelines. Generally, full tube vortex flowmeters are primarily used to measure the flow rate of water with small to medium diameters, while piercing vortex flowmeters are used to measure the flow rate of large diameter pipelines. Vortex flowmeter is now widely used in urban water pipelines and industrial water main pipelines of enterprises such as metallurgy, papermaking, chemical industry, power and chemical fiber;
2、 Flow measurement of non-conductive liquids. Generally, electromagnetic flowmeters are used for measuring the flow rate of conductive liquids, while in the field of measuring the flow rate of non-conductive liquids, vortex flowmeters occupy a dominant position. Vortex flowmeters have been widely used in food, semiconductor industry, petrochemical industry, and pharmaceuticals, such as toluene, trichloroethylene, ethylene, butane liquid ammonia, methanol, formaldehyde, acetone, etc. In addition, it is also used for pure water and ultra clean water in the semiconductor industry;
3、 The flow rate of various industrial water is primarily measured for the circulation of water, wastewater, and waste liquid in the production processes of industries such as metallurgy, building materials, petroleum, chemical, light industry, and power;
4、 Measurement of some corrosive liquids, such as acids li
5、 Measurement of flow rate for some low viscosity oil products, such as kerosene, diesel, gasoline, as well as heavy oil and residual oil whose viscosity decreases after heating. If you feel that reselling or answering correctly would be helpful to you, could you please raise your hand and give a thumbs up to the KNKE vortex flowmeter brand manufacturer in the United States! If you have purchasing needs for vortex flowmeters, please visit the official website of KNKE in the United States for selection and procurement, or inquire with KNKEs professional technical personnel to seek the most suitable product for you.
2. What is the difference between imported vortex flowmeters and domestically produced flowmeters?
Difference between imported flow meters and domestic flow meters:
1. Accuracy: Due to the higher comprehensive production level in foreign countries than in China, the raw materials and processing technology are above the domestic level, and the emphasis on materials is much higher than in China. In addition, the development of foreign flow meters was many years earlier than in China, so there is still a certain gap in the accuracy of domestic and imported flow meters.
.2、 Zero drift: Zero drift is normal during the use of measuring instruments, and there is a certain amount of zero drift every year. However, the zero drift of imported flow meters is slightly smaller than that of domestic flow meters, and generally does not affect normal use.
3、 Lifespan: Under the same working conditions and years of use, the comprehensive performance of imported flow meters is higher tha