Is the high-temperature gas flowmeter/gas mass flowmeter easy to use?

『High temperature gas flowmeter』Related information(clamp on meter|electromagnetic meter|venturi meterrotameter|orifice meter|ultrasonic flow meter|mass flow meter|coriolis mass flow meter|coriolis flow meter|magnetic flow meter|magmeter flow meter|magflow flow meter|mag meter flow meter|electromagnetic flow meter|vortex flow meter|turbine flow meter|thermal mass flow meter|thermal flow meter|rotameter flow meter)

1. Characteristics of Thermal Gas Mass Flow Meter

Easy to install, easy to maintain, bi-directional detection, anti vibration up to 24 points, calibration of flow measurement output analog quantity, multi-point clever non-linear curve correction, wide range ratio of 100:1, detection when flow and temperature return to light, switching display for large caliber small flow measurement, can detect leakage and leak width. Using proprietary technology "double balance structure" packaged sensor proprietary high humidity and high temperature algorithm, medium temperature can reach 500 ℃, direct mass flow detection without temperature and pressure compensation

2. What is gas turbine flow meter?

?

Gas vortex flow meter is mainly used for measuring the flow rate of medium fluids such as air, nitrogen, oxygen, hydrogen, biogas, natural gas, steam, etc. in industrial pipelines. When measuring the volumetric flow rate under working conditions, it is almost not affected by parameters such as fluid density, pressure, temperature, viscosity, etc. No movable mechanical parts, therefore high reliability and low maintenance. The instrument parameters can be stable for a long time. The gas vortex flowmeter adopts a piezoelectric stress sensor, which has high reliability and can operate within the working temperature range of -20 ℃ to+250 ℃. It has both analog standard signals and digital pulse signal outputs, making it easy to use in conjunction with digital systems such as computers. It is a relatively advanced and ideal flow meter. The pulse frequency signal output by gas vortex flowmeter is not affected by fluid properties and composition changes, that is, the instrument coefficient is only related to the sha

High temperature gas flowmeter
pe and size of the vortex generator and pipeline within a certain Reynolds number range. However, as a flowmeter in material balance and energy measurement, it is necessary to detect mass flow rate. At this time, the output signal of the flowmeter should simultaneously monitor volume flow rate and fluid density. Fluid properties and components still have a direct impact on flow measurement. The gas vortex flowmeter is a new type of flowmeter that measures fluid flow in closed pipelines based on the Karman vortex principle. Due to its excellent adaptability to media, it can directly measure the volumetric flow rate of steam, air, gas, water, and liquid without temperature and pressure compensation. Equipped with temperature and pressure sensors, it can measure the volumetric flow rate and mass flow rate under standard conditions, making it an ideal alternative to throttling silver beam flow meters. The gas vortex flowmeter is designed to improve the high temperature resistance and vibration resistance of gases. Due to its unique structure and material selection, the sensor can be used in harsh working conditions such as high temperature (350 ℃) and strong vibration (≤ 1g). In practical applications, the maximum flow rate is often much lower than the upper limit of the instrument, and with changes in load, the minimum flow rate is often lower than the lower limit of the instrument. The instrument is not working in its optimal working range. To solve this problem, it is usually necessary to reduce the diameter at the measuring point to increase the flow rate at the measuring point, and use smaller diameter instruments to facilitate the measurement of the instrument. However, this variable diameter method requires a straight

『SILVER Official Website SERVICE』

Copyright2026SILVER E-Commerce
+86 15365082610