『Defender 520 Flow Meter: Mesa Labs Primary Gas Standardization Equipment』Related information(clamp on meter|electromagnetic meter|venturi meterrotameter|orifice meter|ultrasonic flow meter|mass flow meter|coriolis mass flow meter|coriolis flow meter|magnetic flow meter|magmeter flow meter|magflow flow meter|mag meter flow meter|electromagnetic flow meter|vortex flow meter|turbine flow meter|thermal mass flow meter|thermal flow meter|rotameter flow meter)
Defender 520 Flow Meter: Mesa Labs Primary Gas Standardization Equipment
Quick Answer: The Defender 520 flow meter from Mesa Labs is a primary gas standardization device. It gives a direct volumetric reference for low gas flows, typically from 5 mL/min to 500 mL/min. Silver Automation Instruments supplies industrial flow meters for process lines and often guides customers on calibration references like this unit.
The Defender 520 is a piston based flow standard. It measures gas volume displacement with a moving piston inside a precise cylinder. The unit reads actual gas flow directly. It does not need a secondary calibration curve. That is why it is called a primary standard.
Most engineers skip this part. A primary standard works without external calibration because the geometry and timing are the reference. You can use it to check rotameters, mass flow controllers, air sampling pumps, and small gas meters. The Defender 520 is portable and runs on battery power. You can carry it to a bench or a field lab.
Key Specifications That Matter for Gas Calibration
Here is the thing. The Defender 520 is not a process flow meter. It is a calibration tool for low flow gas lines. Typical flow range is 5 mL/min to 500 mL/min. Accuracy is around plus or minus 1 percent of reading. The display shows flow in mL/min, L/min, or cc/min. It also records temperature and pressure, so you can standardize readings to 20 degrees C and 101.325 kPa if needed.
The unit operates in ambient temperatures from 0 degrees C to 50 degrees C. It can handle clean dry gases. Do not use it with aggressive or wet gas. Battery life is about 8 hours under normal lab use. For industrial gas flows above 500 mL/min, you need a different device, such as a thermal mass flow meter or Coriolis mass flow meter. Silver Automation Instruments can supply those larger flow meters.
Where Engineers Use the Defender 520
We have seen this on customer sites many times. Environmental monitoring teams use it to verify low flow air samplers. Pharmaceutical labs use it to check gas flows into analytical instruments. Food and beverage plants use it for modified atmosphere packaging gas lines. Oil and gas service companies use it for leak rate verification and small purge gas systems.
Last year, a water treatment contractor in the Philippines asked us for aeration air flow meters. They used a Defender 520 in their lab to check the small air flow meters before field installation. That test showed a batch of sensors drifting above 2 percent of reading. They rejected that ba
How This Fits with Industrial Flow Meter Supply
The Defender 520 is made by Mesa Labs. Silver Automation Instruments does not manufacture it. We supply process and utility flow meters for larger pipe sizes and higher flows. For example, electromagnetic flow meters for water and wastewater, Coriolis mass flow meters for chemical dosing, ultrasonic flow meters for large pipes, vortex flow meters for steam, oval gear flow meters for diesel and oils, and thermal mass flow meters for gas.
Because the Defender 520 is a low flow reference, it often supports calibration checks for small instruments used in pilot plants or gas analyzers. When you scale up to DN15 or larger pipes, you need industrial flow meters with 4-20 mA HART, pulse, or Modbus outputs. That is what we provide. We ship to industrial end users and distributors in Southeast Asia, Oceania, Latin America, Africa, and the Middle East.
Contact Silver Automation Instruments
Send us your pressure (bar), temperature (°C), pipe size (DN), and flow range. We will recommend a flow meter from our range. For gas lines, include gas type and whether you need mass flow or standard volumetric units. For liquid lines, include viscosity in cP if it is not water. Call us at +86-25-68650347, WhatsApp at +86-25-52155837, or WeChat at +86 15365082610.
FAQ
Q: What flow range does the Defender 520 cover?
A: The Defender 520 covers low gas flows from 5 mL/min to 500 mL/min. It is a primary standard for calibration, not a process meter.
Q: Can the Defender 520 measure liquid flow?
A: No. It is designed for clean dry gases only. For liquid flow, consider an electromagnetic flow meter or Coriolis mass flow meter from Silver Automation Instruments.
Q: Is the Defender 520 suitable for natural gas?
A: It can be used with clean gas. For natural gas process measurement, use a thermal mass flow meter or Coriolis flow meter sized for pipe conditions. Send us your gas composition, pressure, and temperature.
Q: What is the accuracy of the Defender 520?
A: Typical accuracy is plus or minus 1 percent of reading for the low flow range. This assumes clean gas and stable ambient conditions.
Q: Does Silver Automation Instruments sell the Defender 520?
A: We focus on industrial flow meters and transmitters. If you ask our team, we can direct you to a Mesa Labs channel partner for the Defender 520. For the main process line flow meters, we supply direct.
Hot Blog
Related AD
