『Flow meter bypass』Related information(clamp on meter|electromagnetic meter|venturi meterrotameter|orifice meter|ultrasonic flow meter|mass flow meter|coriolis mass flow meter|coriolis flow meter|magnetic flow meter|magmeter flow meter|magflow flow meter|mag meter flow meter|electromagnetic flow meter|vortex flow meter|turbine flow meter|thermal mass flow meter|thermal flow meter|rotameter flow meter)
What should be noted when installing a steam flowmeter??
When installing a steam flowmeter, the following issues should be noted: piping requirements: The inner diameter of the upstream and downstream piping at the installation point of the steam flowmeter should be the same as the inner diameter of the flowmeter to ensure smooth fluid flow and accurate measurement of the coarse wax strip.. Requirement for straight pipe section: The flowmeter must be installed horizontally on the pipeline, and the pipeline inclination should not exceed 5 °. The axis of the flowmeter should be concentric with the axis of the pipeline and flow in the same direction. The upstream pipeline length of the flowmeter should have an equal diameter straight pipe section of not less than 10D. It is recommended that the upstream straight pipe section be 20D and the downstream be 5D to improve measurement accuracy. Requirements for bypass pipe: Cut off valves should be installed on the front and rear pipelines of the flowmeter, and bypass pipes should be set up so as not to affect the normal use of the rock reed medium during flowmeter maintenance. The flow control valve should be installed downstream of the flowmeter, and the upstream shut-off valve must be fully opened during use to avoid unstable flow. Installation site cracking: Steam flow meters should be installed in a location that is easy to maintain, free from strong electromagnetic interference and thermal radiation, to ensure their normal operation and extend their service life. External environmental requirements: It is best to install steam flow meters indoors. If it must be installed outdoors, sun protection, rain protection, and lightning protection measures should be
2. What is the small circuit containing the flowmeter in the drawing and what is its function? Hello! Finally met someone who explained the problem clearly; The meaning of small circuit is that (the main channel is the one where the flowmeter is installed, and the bypass is marked with DN65). Generally, the main circuit is used as the main channel for operation. However, when the flowmeter has problems, we still need to produce it. At this time, it is time to use a bypass. We can let the liquid go through the bypass and remove the flowmeter for maintenance. 3. Precautions for installation of split type electromagnetic flowmeter
Precautions for installation of split type electromagnetic flowmeter: Multiple aspects need to be paid attention to during the installation of split type electromagnetic flowmeter to ensure its accurate and stable operation.
. Here are some key precautions:1. Grounding of the sensor: In order to ensure the reliable operation of the split electromagnetic flowmeter, improve measurement accuracy, and avoid interference from external parasitic potentia
Hot News
Related AD
