Integrated electromagnetic flowmeter

『Integrated electromagnetic flowmeter』Related information(clamp on meter|electromagnetic meter|venturi meterrotameter|orifice meter|ultrasonic flow meter|mass flow meter|coriolis mass flow meter|coriolis flow meter|magnetic flow meter|magmeter flow meter|magflow flow meter|mag meter flow meter|electromagnetic flow meter|vortex flow meter|turbine flow meter|thermal mass flow meter|thermal flow meter|rotameter flow meter)

What are the performance characteristics of electromagnetic flow meters?

2. How to calibrate an electromagnetic flowmeter

1. If the system uses compressed air power, turn on the air compressor to achieve the desired air source pressure, in order to ensure the rapid switching of the commutator and the normal operation of the clamp..

2、 After the electromagnetic flowmeter is correctly installed and connected, it should be powered on according to the requirements of the calibration regulations and preheated for about 30 minutes.

3、 If using a high-level tank water source, check whether the overflow signal of the stabilizing water tower appears. Before the formal experiment, Qinyan should circulate the calibration medium in the pipeline system for a certain period of time according to the requirements of the calibration regulations, and at the same time check whether there is any leakage in the sealing parts of the pipeline.

3. What are the properties of electromagnetic flow meters?

A new type of flow measurement instrument that has rapidly developed with the development of electronic technology.

1、 Measurement is not affected by changes in fluid density, viscosity, temperature, pressure, and conductivity;

2、 There are no obstructing flow components or pressure loss inside the measuring tube, and the requirements for straight pipe sections are relatively low. Has unique adaptability to slurry measurem

3、 Reasonably selecting sensor lining and electrode materials, which have good corrosion resistance and wear resistance;

4、 The converter adopts a novel excitation method, with low power consumption, stable zero point, and high accuracy. The flow range can reach 150:1;

5、 The converter can be integrated or separated from the sensor;

6、 The converter adopts a 16 bit high-performance microprocessor, 2x16 LCD display, convenient parameter setting, and reliable programming;

7、 The flowmeter is a bidirectional measurement system equipped with three calculators: forward total, reverse total, and differential total; It can display positive and negative flow rates and has multiple outputs: current, pulse, digital communication HART;

8、 The converter adopts surface mount technology (SMT) with self checking and self diagnostic functions;

9、 The measurement accuracy is not affected by changes in fluid density, viscosity, temperature, pressure, and conductivity. The sensors induced voltage signal is linearly related to the average flow rate, resulting in high measurement accuracy.

10、 There is no obstruction in the measuring pipeline, so there is no additional pressure loss; There are no movable parts inside the measuring pipeline, so the sensor has an extremely long lifespan. To learn more about electromagnetic flow meters, you can consult with Mike Sensor 1. As the induced voltage signal is formed in the entire space filled with a magnetic field and is the average value on the pipeline surface, the sensor requires a shorter straight pipe section, with a length of 5 times the diameter of the pipeline. 1

2、 The converter adopts the latest and most advanced internatio

『SILVER Official Website SERVICE』